I.Summary
Because the battery capacity, internal resistance, voltage, and other parameter values are not completely consistent,this difference causes the battery with the smallest capacity to be easily overcharged and discharged during charging, and the smallest battery capacity becomes smaller after damage, entering a vicious cycle. The performance of single battery directly affects the charge and discharge characteristics of the whole battery and the reduction of battery capacity.BMS without balance function is just a data collector,which is hardly a management system.BMS active equalization function can realize the maximum continuous 1A equalization current. Transfer the high-energy single battery to the low-energy single battery, or use the whole group of energy to supplement the lowest single battery.During the implementation process,the energy is redistributed through the energy storage link, so as to ensure the battery consistency to the greatest extent, improve the battery life mileage and delay the battery aging.
II.Technical indicators of the main parameters
III.Main wire description
Line name: Collecting line
Default specification:1007 24AWG L=450mm （17PIN）
IV.operation notice
Active equalization must match the same series number of BMS, different series numbers can not be mixed,
1. BMS Assembly completed after welding all the connections,
2. INSERT BMS INSERT,
3. Before the Protection Board is turned on, please make sure the connection of the balance cable is normal, and check whether the protection board has been securely fixed with the battery, after confirming that no error can be connected to the protection board power, otherwise may cause abnormal work, or even burn and other serious consequences.
V.Warranty
All lithium battery protection board accessories produced by the company are guaranteed for one year; If the damage is caused by human factors, it shall be repaired with compensation.
Post time: Jul-21-2023
