Basic introduction
Daly's newly launched WIFI module can realize BMS-independent remote transmission and is compatible with all new software protection boards.
And the mobile APP is updated simultaneously to bring customers a more convenient lithium battery remote management and use experience.
Product Description
Dimensions:
Dimensions:
Sticker picture: Lithium/neutral (different material numbers)
Pin definition: Wiring harness end (connected to the protection board, according to the UART interface of the protection board, with or without buckles, no same material number)
Use action
1. Preparation: Check whether the product is complete and whether the connecting cable is a "WIFI cable". Confirm that the wireless network is 2.4G
The network can be connected normally and surf the Internet, connect the mobile phone to the WIFI network.
2. Install the product: Insert the WIFI module into the UART communication port of the BMS through the WIFI cable; (According to the warranty
The UART interface of the guard plate is available with or without buckles, and different material numbers)
3. Install the APP: Install the “SMARTBMS” APP through the app store or QR code, and grant the corresponding permissions.
Turn on the WIFI, Bluetooth, and positioning functions of your phone.
4. APP operation: Click to enter "Remote Communication". If you use it for the first time, you need to register an account by filling in your email address;
5. Select mode: After completing the account registration, enter the "remote monitoring" function interface. Among the three modes of "single group", "parallel connection" and "series connection", select the mode you need and enter the "Connect Device" interface.
6. Add a module: Enter the "+" sign in the upper right corner, select the WIFI device, and click "Connect" until the corresponding product name appears on the interface.
7. Module network configuration: Enter the password of the WIFI network and wait for the network configuration to be completed. The network distribution process needs to keep the APP, router, and BMS working normally.
8. Device naming: After the network configuration is successful, the WIFI module name can be customized. The default is the factory name, "DL-xxxxxxxx". After the naming is saved successfully, the entire network configuration process ends.
9. Enter the device: Return to the "Connect Device" page, and the corresponding WIFI module device will appear. If the status is "Online", you can click to enter the "Data Details Page". Upload the data to the cloud server through the WIFI network. The APP obtains the BMS data from the cloud server and displays it. Then you can enter the management interface of the device to view and set various parameters.
10. Local monitoring: In Bluetooth mode, when the WIFI module status is "offline" or deleted, a Bluetooth connection can be made through "local monitoring". The usage method is the same as the Bluetooth module.
11. Management platform: The WIFI module supports the Daly Cloud platform. The login method is the same as the Bluetooth module, but the working principle is different. When the device is "online", the BMS data is uploaded to the management platform through the device. The Bluetooth module is uploaded through APP.
APP download
You must use the latest SMART BMS starting with V3, which is not currently on the shelves. You can scan the QR code below to download. Available after release
Update and download in the HUAWEI, Google and Apple app stores, or contact Daly staff to obtain the latest version of the APP installation file.
Starting with V2, only Bluetooth modules are supported.
Precautions
1. Bluetooth cannot be found: whether the mobile phone permissions are authorized, whether the WIFI module has been assigned to the network and is in the "online" state.
2. Network distribution failure: Check whether the WIFI network is normal and whether the network is a 2.4G network.
3. The device is offline: Check whether the WIFI network is normal, check whether the BMS power supply is normal and whether the connecting cable is connected normally.
enter.
4. Connecting cable: The WIFI module connecting cable is not shared with the Bluetooth module. It is divided into buckle terminals according to the protection board terminals and without terminals. For example, the communication ports of R16L and R10Q are buckled, so the connecting cable should also be buckled.
Post time: Sep-23-2023
